TECHSHORE INSPECTION SERVICES|SAFETY_COURSES_OIL&GAS IN_ZUDAN|NDT IN_ZUDAN |QA/QC IN_ZUDAN|FIRE&SAFETY IN_ZUDAN|WELDING IN_ZUDAN|FABRICATION IN_ZUDAN|MEP IN_ZUDAN|HVAC IN_ZUDAN|LOGISTICS IN_ZUDAN|INSTRUMENTATION_IN_ZUDAN

Posted on Leave a commentPosted in Articles, Blog, e-Learning

TECHSHORE INSPECTION SERVICES : TURBOCHARGER http://techshore.in/  A turbocharger is a turbine-driven device that increases the efficiency of internal combustion engines and power output by forcing or pumping extra air into the combustion chamber. This improvement occur over a naturally regulated engine’s power output is due to the fact that the compressor can force more air and proportionately […]

TECHSHORE INSPECTION SERVICES IN KOLLAM|NDT COURSE IN KOLLAM|INSTITUTE OF NDT(CIVIL) IN KOLLAM|TRAINING CENTRE FOR NDT IN KOLLAM |NDT INSTITUTE IN KOLLAM

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Concrete NDT (CIVIL) http://techshore.in/concrete-ndt-civil.php It is often necessary to test concrete structures after the concrete has hardened to determine whether the structure is suitable for its designed use. Ideally such testing should be done without damaging the concrete. The tests available for testing concrete range from the completely non-destructive, where there is no damage to […]

TECHSHORE INSPECTION SERVICES|INSTITUTE FOR JOB ORIENTED COURSES|SAFETY_COURSES_OIL&GAS|NDT|QA/QC|FIRE&SAFETY|WELDING|FABRICATION|MEP|HVAC|LOGISTICS|INSTRUMENTATION_IN_NIGERIA

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Techshore Inspection Services : FLEXIBLE MANUFACTURING SYSTEMS STUDY http://techshore.in/ Introduction  In the year of the 1960s, market competition become more intense. Between 1960 to 1970 cost was the primary concern. Later quality became a priority. As the market become more and more complex, speed of delivery become something customer also needed. A strategy was formulated: […]

TECHSHORE INSPECTION SERVICES|INSTITUTE OF JOB ORIENTED COURSES|NO.1 TRAINING_INSTITUTE|OIL&GAS|NDT|QA/QC|FIRE&SAFETY|WELDING|FABRICATION|MEP|HVAC|LOGISTICS|INSTRUMENTATION_INSTITUTES_IN_BHOPAL

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Skills Necessary for Maximizing Logistics Effectiveness http://techshore.in/ There are a few skills for improving the Logistics Effectiveness are listed below Integrity Integrity, in general, means fairness. It is the point at which a representative can sincerely share his genuine perspectives and contemplations in regards to the issue or operational issue with every one of the […]

TECHSHORE INSPECTION SERVICES|INSTITUTE OF OIL&GAS IN RAJASTAN|INSTITUTE OF NDT IN RAJASTAN|INSTITUTE OF QA/QC IN RAJASTAN|INSTITUTE OF FIRE&SAFETY IN RAJASTAN|INSTITUTE OF WELDING IN RAJASTAN|INSTITUTE OF FABRICATION IN RAJASTAN |INSTITUTE OF MEP IN RAJASTAN|INSTITUTES OF HVAC IN RAJASTAN|INSTITUTES OF LOGISTICS IN RAJASTAN|INSTITUTES OF INSTRUMENTATION__IN_RAJASTAN

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Six Sigma Overview http://techshore.in/  Six Sigma is a generally accepted methodology that focuses on civilizing an organization’s operational performance, business practices and systems by identifying and avoiding defects and inconsistencies in processes  If we have a procedure operating at 3sigma then we are allowing 66801.7 errors per million opportunities. Achieving six sigma funds that the process is delivering […]

TECHSHORE INSPECTION SERVICES|INSTITUTE FOR OIL&GAS IN JHARGHAND|INSTITUTE FOR NDT IN JHARGHAND|INSTITUTE FOR QA/QC IN JHARGHAND|INSTITUTE FOR FIRE&SAFETY IN JHARGHAND|INSTITUTE FOR WELDING IN JHARGHAND |INSTITUTE FOR FABRICATION IN JHARGHAND|INSTITUTE FOR MEP IN JHARGHAND|INSTITUTE FOR HVAC IN JHARGHAND|INSTITUTE FOR LOGISTICS IN JHARGHAND|INSTITUTE FOR INSTRUMENTATION IN JHARGHAND

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Techshore Inspection Services : Ultrasound Testing Techniques – Normal and Angle Beam http://techshore.in/ While straight beam techniques can be highly effective at finding laminar flaws, they are not effective when testing many common welds, where discontinuities are typically not oriented parallel to the surface of the part. The combination of weld geometry, the orientation of […]

A NEW #COURSE #EDP(Entrepreneur Development Program) IS INTRODUCING BY #TECHSHORE_INSPECTION_SERVICES

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Entrepreneur Development Program, a 3 month business program for those who aspire to be entrepreneurs . The course provides an immersive learning environment ably complemented with case studies, discussions, and classes from Industry experts.   Main Objective of the course is to create a passion for self employment;identifying the right opportunity;source of finance and to […]

TECHSHORE INSPECTION SERVICES INSTITUTE OF NDT|OIL & GAS|QA/QC|MEP|HVAC|LOGISTICS|FIRE & SAFETY|INSTRUMENTATION|WELDING|FABRICATION| IN BIHAR

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Wire-line Operations http://techshore.in/ A well that has been equipped with production tubing and various pieces of down hole equipment is considered to have a permanent completion. This allows wire-line operations to be carried out during productive life of the well in complete safety and without pulling the tubing. Wire-line Service is a method for properly maintaining the under […]

TECHSHORE INSPECTION SERVICES FOR OIL & GAS IN DELHI|INSTITUTE FOR OIL & GAS IN DELHI|TRAINING CENTRE FOR OIL & GAS IN DELHI

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Introduction http://techshore.in/A pressure reducing regulator is a device which is used to reduce a high source pressure to a lower working pressure that is suitable for a user’s application. The regulator will have to maintain the outlet pressure within acceptable limits as other conditions may vary. the input pressure and media (gas or liquid) flow […]

TECHSHORE INSPECTION SERVICES IN PATHANAMTHITTA|INSTITUTE OF NDT(CIVIL) IN PATHANAMTHITTA|TRAINING CENTRE FOR NDT IN PATHANAMTHITTA |NDT INSTITUTE IN PATHANAMTHITTA

Posted on Leave a commentPosted in Articles, Blog, e-Learning

Techshore Inspection Services : Plum concret http://techshore.in/ Concrete is a mixture of cementitious material, water, fine and coarse aggregates with or without admixtures.Cementitious material means cement or cement mixed with mineral admixtures like pozzolanic fly ash (PFA),grounded granulated blast furnace slag(CGBFS),micro silica etc.   Plum concrete is a special type of concrete which is usually done where the surface is uneven […]